Switching An Nvr To A Failover Nvr; Switching An Nvr To A Redundant Nvr; Configuring A Failover Nvr; Configuring A Redundant Nvr - Bosch LTC-1311-20 Configuration Manual

Bosch Video Management System
3.
7.2

Switching an NVR to a Failover NVR

Main window >
To configure a Failover NVR you must first change an NVR to a Failover NVR.
To switch an NVR:
1.
2.
7.3

Switching an NVR to a Redundant NVR

Main window >
To configure a Redundant NVR you must first change an NVR to a Redundant NVR.
To switch an NVR:
1.
2.
7.4

Configuring a Failover NVR

Main window >
Before you can configure a Failover NVR you must switch a Primary NVR to a Failover NVR.
After having configured a Failover NVR, you assign it to one or multiple NVRs.
You can perform the following tasks to configure a selected Failover NVR:
–
–
To configure a Failover NVR:
1.
2.
3.
For detailed information on the various fields, see the Online Help for the appropriate
application window.
7.5

Configuring a Redundant NVR

Main window >
Before you can configure a Redundant NVR you must switch a Primary NVR to a Redundant
NVR.
After having configured a Redundant NVR, you assign it to one or multiple NVRs.
Bosch Sicherheitssysteme GmbH
Click the Camera Storage tab to define minimum and maximum storage times, manage
protected recordings, and to optionally schedule the backup of the assigned cameras.
If scheduled backups are desired, you must first create a Task Schedule in Schedules.
Devices > Expand
Right-click an NVR.
This NVR must not have any encoders assigned.
Click Act as Failover NVR.
The NVR is moved to the Failover NVRs node.
Devices > Expand
Right-click an NVR.
This NVR must not have any encoders assigned.
Click Act as Redundant.
The NVR is moved to the Redundant NVRs node.
Devices > Expand
Configuring video and audio storage
Assigning NVRs
Click the Global Settings tab to display network settings of the selected Failover NVR.
Click the Disk Storage tab to configure the storage settings of the selected Failover NVR.
Click the Assigned NVRs tab to add or remove NVRs to the selected Failover NVR
Devices > Expand
Configuration Manual
Configuring NVRs | en
> Expand >
> Expand >
> Expand >
> Expand >
Configuration Client | V3 | 2010.07
37