Adding A Vrm Device With Iscsi Storage - Bosch LTC-1311-20 Configuration Manual

32 en | Configuring devices
6.21

Adding a VRM device with iSCSI storage

Main window >
In your network, you need a VRM service running on a computer, and an iSCSI device.
With Operator Client you cannot display VRM devices.
CAUTION!
When you add an iSCSI device with no targets and LUNs configured, start a default
configuration and add the IQN of each encoder to this iSCSI device.
When you add an iSCSI device with targets and LUNs pre-configured, add the IQN of each
encoder to this iSCSI device.
See Section 6.22 Configuring an iSCSI device, page 33 for details.
To add a VRM device and an iSCSI device:
1.
2.
3.
4.
5.
6.
7.
8.
9.
10. Type the user names and passwords of the devices in the table.
11. Click Test all to log on to all devices.
12. Click Finish.
Configuration Client | V3 | 2010.07
Devices >
Right-click and click Scan VRM Devices.
The Bosch VMS Scan Wizard is displayed.
Click to check the IP address of the desired VRM computer. You can select multiple
computers.
Click Next >>.
The next step of the wizard is displayed.
Click Add iSCSI device.
The Add iSCSI Device dialog box is displayed.
Type a desired display name, the IP address of an iSCSI device, and the device type and
click OK.
The device is added to the scan wizard dialog box.
Assign the iSCSI device to the VRM.
If required assign multiple iSCSI devices.
Click Next >>.
The next step of the wizard is displayed.
Assign the desired IP devices to the VRM.
Click Next >>.
The next step of the wizard is displayed.
If required, select the desired devices and click Test selected to log on to these devices.
In the Status column, the successful logons are indicated with
The failed logons are indicated with
The iSCSI device is connected to the VRM. Video streams from an IP device assigned to
this VRM are recorded on the assigned iSCSI device.
If required, a dialog box is displayed for changing the device names of the detected IP
devices to be used for display. Bosch Video Management System names the devices with
default names. If desired, you can use the existing names of the devices.
Configuration Manual
Bosch Video Management System
.
Bosch Sicherheitssysteme GmbH
.