Table of Contents
Advertisement
76
en | Central Console, computer setup and programming
Element
[Locate]
[Cut]
[Copy]
[Paste]
[Save]
[Cancel]
7.10
Configuring alarm area
In the Transponder database under the File menu, select the SE coordinator where the alarm
area is to be programmed in. Click the [Edit Data] button, followed by Show areas radio
button and select the desired area.
2018.03 | SE3v1.0 | DOC
Usage/Description
Click this button to map the device on the map. The Edit
Transponder's Database Record dialog disappears and the cursor
changes to a cross hair. Moving the cursor to a point on the map and
clicking the left mouse button scrolls the map so the point is at the
center of the screen and all previously defined receivers and areas
are shown with numerical labels.
When the map is showing the location of the desired SE receiver,
move the cross hair to the exact location of the SE receiver and click
the right mouse button. The Edit Transponder's Database Record
dialog reappears and the selected location is entered into the X and
Y coordinates.
If the cross hair cursor is displayed and you want to exit without
changing any coordinate values, press the <Esc> key and the Edit
Transponder's Database Record dialog reappears.
Click this button to copy the displayed point to a clipboard and
returns all values to their defaults.
Click this button to copy the displayed point to a clipboard.
Displayed values are not changed.
Click this button to copy the clipboard values to the displayed point.
The values on the clipboard are not changed and can be copied to
more points or areas.
Click this button to save all changes to the database.
Click this button to close the dialog window. If changes were made,
the dialog window below appears, giving you another chance to save
the changes by clicking the [Yes] button.
Technical Reference Manual
Security Escort
Robert Bosch (SEA) Pte Ltd
Advertisement
Table of Contents
