Security Escort
Figure 5.5: SE receiver Spacing
Pre-wired installations
When mounting the enclosure to a pre-wired electrical box, make sure that the electrical box
has a 15.2 cm (6 in.) overhead clearance. The enclosure should be mounted as shown in figure
below.
Notice!
The enclosure does not currently support octagonal electrical boxes.
Robert Bosch (SEA) Pte Ltd
1 SE receiver 1 stops sounding the test
beeps when SE receiver 2 is moved
past this point
2 SE receiver 1
Technical Reference Manual
System wiring | en
3 SE receiver 2 at maximum range
4 SE receiver 2 beyond maximum range
41
2018.03 | SE3v1.0 | DOC