Table of Contents
Advertisement
148 en | Troubleshooting coordinators, points and receivers
Attribute
IPAddress
PortNumber
CommPortIndex
<Receiver> element
Attribute
Address
PointType
AlgoNumber
2018.03 | SE3v1.0 | DOC
Value
The value is blank if IsIPConnected is 0 (RS232). The value should
contain a valid IP address if IsIPConnected is 1 (TCP IP).
The value is 0 if IsIPConnected is 0 (RS232). The value is 1-65535
if IsIPConnected is 1 (TCP IP).
The value is always 0 if IsIPConnected is 1 (TCP IP). If
IsIPConnected is 0 (RS232), the following values are valid: 0 (A),
1 (B), 2 (C), 3 (D), 4 (E), 5 (F), 6 (G), 7 (H), 8 (I), 9 (J), 10 (K), 11
(L)
Value
Address of the SE receiver. 0-63. This field should contain only
numeric ASCII characters.
Type of point. This field should contain only numeric ASCII
characters. Valid values are: 0 (SE receiver), 1 (Alert unit), 2
(Virtual) and 7 (None).
This field should contain only numeric ASCII characters. Valid
values are: 0 (Default), 1 (Classic). 2 (Linear), 3 (Low), 4
(Medium) and 5 (Strong).
Technical Reference Manual
Security Escort
Robert Bosch (SEA) Pte Ltd
Advertisement
Table of Contents
