Table of Contents
Advertisement
Security Escort
3.
4.
5.
6.
7.
8.
Robert Bosch (SEA) Pte Ltd
Browse and select the firmware file that you wish to upload. Click the [Open] button.
A confirmation dialog window appears. Click the [Yes] button to proceed with the
upload, or the [No] button to abort.
Upon clicking the [Yes] button, the firmware will be uploaded. An indicator bar appears
on screen to display the progress of the firmware upload. To abort the upload, click the
[Cancel] button.
Upon completion of the firmware upload, the indicator bar will disappear. The version
number is now updated, and the [Listen] button is enabled.
Click the [Listen] button to listen to transmissions from SE transmitters. The [Listen]
button is now disabled.
Perform a transmitter test within sight of the SE coordinator. The SE transmitter will emit
a series of beeping tones (1 short beep tone, with an interval, followed by 3 consecutive
short beep tones) repeatedly. The SE transmitter information appears in the SE
Transmitters grid view. If the version of the SE transmitter is the same as the version of
Technical Reference Manual
Configuring equipment using Utility tool | en
95
2018.03 | SE3v1.0 | DOC
Advertisement
Table of Contents
