Table of Contents
Advertisement
224 en | System menus and dialogs
Element
Demo lanyard alarm,
subscriber 2
Demo man down alarm,
subscriber 3
Demo man down
restoral, subscriber 3
Demo test subscriber 1 For demonstration only, and can't be used in a live system. It
Demo test subscriber 2 For demonstration only, and can't be used in a live system. It
Demo test subscriber 3
with low battery
Demo troubles
Demo trouble restoral
Demo maintenance
alarm
Demo maintenance test For demonstration only, and can't be used in a live system. It
2018.03 | SE3v1.0 | DOC
Usage/Description
For demonstration only, and can't be used in a live system. It
causes system to display a lanyard alarm from the subscriber with
transmitter ID number 2.
For demonstration only, and can't be used in a live system. It
causes system to display a man down alarm from the subscriber
with transmitter ID number 3. The man down alarm is delayed by
the programmed man down delay (usually 10 seconds).
For demonstration only, and can't be used in a live system. It will
restore a previous man down alarm from the subscriber with
transmitter ID number 2, if it has not timed out and is not being
displayed.
simulates a test from the subscriber with transmitter ID number 1.
simulates a test from the subscriber with transmitter ID number 2.
For demonstration only, and can't be used in a live system. It
simulates a test from the subscriber with transmitter ID number 3.
This test also reports low battery.
For demonstration only, and can't be used in a live system. It
simulates troubles from a transponder. Point troubles are
simulated for AC loss, tamper and no response. Transponder
troubles are simulated for remote key and remote key tamper. The
individual troubles can be enabled or disabled in the Popup
Trouble Filter dialog. The trouble delay in the Popup Trouble Filter
dialog will also affect these troubles. Therefore, for demo
purposes, it should be set to 0.
For demonstration only, and can't be used in a live system. It
simulates trouble restorals for all the troubles sent in Demo
Troubles.
For demonstration only, and can't be used in a live system. It
simulates an alarm from a maintenance transmitter.
simulates a test from a maintenance transmitter.
Technical Reference Manual
Security Escort
Robert Bosch (SEA) Pte Ltd
Advertisement
Table of Contents
