Table of Contents
Advertisement
Security Escort
Element
Modem
communications
No password to exit
No password on
reentry
No password timeout
Bring to front on alarm
Bring to front on
trouble
Not always top window If the Security Escort System is intended to be the only application
Control room output to
siren
Control room output to
strobe
Control room output to
spare
Control room output to
output 1
Control room output to
output 2
Force map background
erase
Robert Bosch (SEA) Pte Ltd
Troubleshooting coordinators, points and receivers | en 103
Usage/Description
Normally, this checkbox is not selected. If selected, the
communication to the modem will be displayed on the history
screen. This function is only used to diagnose communication
problems with the modem.
If selected, the software will exit without asking for a password.
Normally, this checkbox is not selected.
If selected, the software will not ask for a password when the user
switches to another program and then switches back to the still
running Security Escort. Normally, this checkbox is not selected.
If selected, the software will not ask for a password after the
screen saver kicks in. Normally, this checkbox is not selected.
If selected, the software will jump to the front when a new alarm
occurs. Normally, this checkbox is selected.
If selected, the software will jump to the front when a trouble
dialog pops up. Normally, this checkbox is selected.
running on this computer, leave this checkbox unselected. This will
prevent other applications from taking over the screen. The
Security Escort System will always be present. If the Security
Escort System is to be run on a computer with other applications,
select this checkbox and it will share the computer's display with
all other Windows applications. After selecting this checkbox, stop
and restart the Security Escort System for this feature to take
effect. This checkbox is unselected by default.
If selected, whenever there is an unacknowledged alarm, the siren
output on the Control room / Point indicated below will operate.
If selected, whenever there is an unacknowledged alarm, the
strobe output on the Control room / Point indicated below will
operate.
If selected, whenever there is an unacknowledged alarm, the spare
output on the Control room / Point indicated below will operate.
If selected, whenever there is an unacknowledged alarm, output 1
on the Control room / Point indicated below will operate.
If selected, whenever there is an unacknowledged alarm, output 2
on the Control room / Point indicated below will operate.
Use this checkbox to erase the map screen. It should only be
selected if there are problems with icons not being cleared
properly from the screen. Otherwise, it will cause the screen to
flicker.
Technical Reference Manual
2018.03 | SE3v1.0 | DOC
Advertisement
Table of Contents
