Table of Contents
Advertisement
Security Escort
Element
Test min level
Test differential
Alarm min. level
Alarm differential
Byte 6
Byte 7
Spare 1
Spare 2
Test transmitter type
Test receiver 1/2/3/4
Transmit delay
Transmit point
Load delay
Tamper load
Transponder
[Previous]
[Next]
[Send change]
[Reset to Default]
[Cancel]
10.4.7
Transponder data view
This dialog is solely for engineering evaluation of the SE coordinator only.
Robert Bosch (SEA) Pte Ltd
Usage/Description
This is the minimum receive level (1 to 255) an SE receiver
must see before the green light displays acknowledging a
successful test. Leave this item at default (128).
This is the minimum difference in receive level (1 to 255) an
SE receiver must be less than the loudest receiver hearing a
test before the green light displays acknowledging a
successful test. Leave this item at default (64).
This is the minimum receive level (1 to 255) an SE receiver
must see before the sounder and red light is displayed for
an alarm. Leave this item at default (1).
This is the minimum difference in receive level (1 to 255) an
SE receiver must be less than the loudest SE receiver
hearing an alarm before the sounder and red LED are
displayed for an alarm. Leave this item at default (255).
This option is currently disabled and reserved for future
use.
This option is currently disabled and reserved for future
use.
This option is currently disabled and reserved for future
use.
This option is currently disabled and reserved for future
use.
These parameters are used for engineering system load
testing only. Do not use in a live system, as they can
generate more traffic than a system can handle; therefore,
actual alarms may be missed. Leave them at default.
Select the SE coordinator the data is presented for from
the drop down list.
Returns to the previous SE coordinator in the system.
Advances to the next SE coordinator in the system.
Sends the changes made to the selected SE coordinator.
Changes are not made to the transponder EEPROM memory
unless this button is clicked.
Reset the selected SE coordinator to the default settings.
Cancel the operation and close the dialog window.
Technical Reference Manual
System menus and dialogs | en 197
2018.03 | SE3v1.0 | DOC
Advertisement
Table of Contents
