Table of Contents
Advertisement
Security Escort
Element
Alarm Location
Tick Passes Hour
Idle Passes Hour
Users
Transponders
Receivers
Alert Unit
SE coordinators
SE receivers
Workstations
[Reset Max]
[Cancel]
10.7.2
Demo options
There is a number of demo options to simulate various alarm and test scenarios. However,
these options are greyed out and unavailable in a live system. They are only available in the
demo version of the Security Escort.
Element
Demo manual alarm,
subscriber 1
Robert Bosch (SEA) Pte Ltd
Usage/Description
The amount of time spent to compute an alarm location.
The number of passes through the tick time processor that
occurred in an hour.
The number of passes through the idle time processor that
occurred in an hour.
Displays the current and maximum number of subscribers that
this Security Escort system installation allows. The maximum
number is programmed into the software key.
Displays the current and maximum number of transponders that
this Security Escort System installation allows. The maximum
number is programmed into the software key.
Displays the current and maximum number of receivers that this
Security Escort System installation allows. The maximum number
is programmed into the software key.
Displays the current and maximum number of alert units that this
Security Escort System installation allows. The maximum number
is programmed into the software key.
Displays the current and maximum number of SE coordinators
that this Security Escort System installation allows. The maximum
number is programmed into the software key.
Displays the current and maximum number of SE receivers that
this Security Escort System installation allows. The maximum
number is programmed into the software key.
Displays the current and maximum number of workstations that
this Security Escort System installation allows. The maximum
number is programmed into the software key.
Resets all of the max timers.
Click this button to close the dialog window.
Usage/Description
For demonstration only, and can't be used in a live system. It
causes system to display an alarm from the subscriber with
transmitter ID number 1. In the System Preferences dialog, select
Enable Demo Selections checkbox to enable these demo alarm
and trouble selections. The transponder communication ports and
network communication ports must also be disabled, and the
operator of the system must login at "Installer" or "Installer
Master" authority level.
Technical Reference Manual
System menus and dialogs | en 223
2018.03 | SE3v1.0 | DOC
Advertisement
Table of Contents
