Table of Contents
Advertisement
106 en | Troubleshooting coordinators, points and receivers
Element
Strong depth
[Save]
[Cancel]
9.3
Security Preferences
The Security Preferences dialog is used to make important settings that govern how the
Security Escort system reacts in the event of alarm and test transmissions from the
subscribers' transmitters. This dialog is available only to the Security Director or his/her key
operator.
Figure 9.2: Security Preferences dialog
2018.03 | SE3v1.0 | DOC
Usage/Description
This setting controls the involvement of SE receivers in the alarm
location calculation only when the "Strong Algorithm" is being
used. The setting can range from 0 to 6 (default is 2). When set to
0, only the SE receivers closer to the actual location of the alarm
will be considered in the location calculation. As the setting is
raised, more distant SE receivers will be included in the alarm
calculation. Typically, lower settings are better than higher
settings. Change this setting if there are known problems with the
location using the "Strong Algorithm". The Enable algorithm
tweaks checkbox must be selected for this to be visible.
Save the changes and close the dialog window.
Cancel the changes and close the dialog window.
Technical Reference Manual
Security Escort
Robert Bosch (SEA) Pte Ltd
Advertisement
Table of Contents
