Fujitsu ETERNUS LT260 User Manual page 20

Chapter 1 Overview
1.2 References for Setup
1.2.3.3 Fibre Channel Connection (Fabric Connection) for Windows
The following procedure explains how to connect the LT260 to a Windows server with a fabric connection.
Workflow
Refer
IMPORTANT
Refer
Refer
FUJITSU Storage ETERNUS LT260 Tape Library User's Guide -Server Connection-
Making a Check before Starting the Procedure
Check the FC switches and the environment (operating system, backup software, and HBAs) of
the server to be connected to the LT260.
-
"1.1 Operating Environment" (page 8)
Setting the LT260
Perform the settings for the LT260.
Change the topology setting to "Fabric". Set a fixed value for the link speed.
-
"Chapter 2 Setting the LT260" (page 22)
-
"2.2 Settings for Fibre Channel Connections" (page 22)
-
"2.2.1 Setting the Link Speed" (page 22)
-
"2.2.3 Setting the Topology (for Connections via FC Switches)" (page 23)
Setting the Operating System
Make settings for the HBA driver and the device driver.
-
"3.3 Windows" (page 32)
-
"3.3.2 Fibre Channel Connections" (page 33)
Copyright 2019 FUJITSU LIMITED
20
P3AM-8812-07ENZ0