Chapter 2
Setting the LT260
This chapter describes the necessary LT260 settings to use the LT260 from backup software.
Use the operator panel to perform the settings that are described below. For more details about how to use
the operator panel, refer to "FUJITSU Storage ETERNUS LT260 Tape Library User's Guide -Panel Operation-" and
"FUJITSU Storage ETERNUS LT260 Tape Library User's Guide -Installation & Operation-".
To check the server environment that is used, refer to our web site (https://www.fujitsu.com/global/products/
computing/storage/tape/).
2.1
Settings for SAS Connections
No setting is required for SAS models.
2.2
Settings for Fibre Channel Connections
This section explains how to set up the drives for Fibre Channel connections.
2.2.1
Setting the Link Speed
For the link speed of a drive path, 2Gbit/s, 4Gbit/s, or 8Gbit/s can be selected.
For more details about the settings, refer to "FUJITSU Storage ETERNUS LT260 Tape Library User's Guide
-Panel Operation-".
Although the "Auto" setting can be selected, select one of the fixed values according to the FC switch or the
HBA of the connection destination that is used.
FUJITSU Storage ETERNUS LT260 Tape Library User's Guide -Server Connection-
22
Copyright 2019 FUJITSU LIMITED
P3AM-8812-07ENZ0