Netvault; Notes On Operation - Fujitsu ETERNUS LT260 User Manual

Chapter 4 Setting Backup Software

4.5 NetVault

4.5 NetVault
This section provides notes about the settings that are performed for NetVault.
4.5.1

Notes on Operation

■ Cleaning tape drives
• NetVault has a function to automatically clean tape drives. When automatically cleaning tape drives, use
the NetVault's automatic cleaning function.
• To use the NetVault cleaning function, make settings as follows.
- For NetVault Backup 9 and earlier
To use the cleaning function for NetVault Backup 9 or earlier, perform the following settings.
Procedure
1
FUJITSU Storage ETERNUS LT260 Tape Library User's Guide -Server Connection-
Specify the Generic Cleaning items of the drive as follows:
• When an LTO5 drive is used (model name: LT26ASHE, LT26ASHL, LT26AFHE, LT26AFHL)
- Issue a load command to start cleaning cycle: on (the default setting is "on")
- Use Generic Cleaning: on (the default setting is "off")
• When an LTO6, LTO7, or LTO8 drive is used (model name: LT26BSKE, LT26BSKL, LT26BFKE,
LT26BFKL, LT26BSME, LT26BSML, LT26BFME, LT26BFML, LT26BSNE, LT26BSNL, LT26BFNE,
LT26BFNL)
- Issue a load command to start cleaning cycle: off (the default setting is "on")
- Use Generic Cleaning: on (the default setting is "off")
The following shows an example configuration in which "Issue a load command to start cleaning
cycle" is set to "off" and "Use Generic Cleaning" is set to "on".
Copyright 2019 FUJITSU LIMITED
45
P3AM-8812-07ENZ0