Fujitsu ETERNUS LT260 User Manual page 49

Chapter 4 Setting Backup Software
4.5 NetVault
7
8
9
10
11
FUJITSU Storage ETERNUS LT260 Tape Library User's Guide -Server Connection-
Confirm that the item described below is set to "ON".
Change to "ON" if this item is currently set to "OFF".
• Cleaning Tapes Supported
Enter "b" and then press the [Enter] key.
Return to the Drive Configuration screen.
In the Device Configuration screen, enter "s" to save the settings.
The drive setting is complete.
Enter "q" to quit the Drive Configuration screen.
Execute the following command to perform the library cleaning settings.
deviceconfig.exe –username <user_name_for_NetVault> -password <password>
-librarymachine <NetVault_machine_name_where_the_library_is_connected>
-libraryname <library_name>
The Changer Configuration screen appears.
Copyright 2019 FUJITSU LIMITED
49
P3AM-8812-07ENZ0