Removable Storage Manager (Rsm) - Fujitsu ETERNUS LT260 User Manual

Chapter 3 Setting the Operating System
3.3 Windows
*2:
After the contents in
If the above contents cannot be checked, check again whether the HBA driver has been successfully
installed. If no problem is found with the installation of the HBA driver, a powered-off LT260, loose
connection, or a setting error of topology/Loop ID can be assumed. Check the settings and reboot the
server before considering the contents.
3.3.3

Removable Storage Manager (RSM)

If the Removable Storage Manager (RSM) service is enabled, backup software operations may be affected.
RSM must be stopped.
Perform the following procedure to stop RSM.
Procedure
1
Open [Services] and double-click [Removable Storage].
FUJITSU Storage ETERNUS LT260 Tape Library User's Guide -Server Connection-
Displayed if the model name of the tape drive is in the following list:
LT26BSKE, LT26BSKL (LTO-6 SAS HH drive option -I)
LT26BFKE, LT26BFKL (LTO-6 FC HH drive option -I)
LT26BSME, LT26BSML (LTO-7 SAS HH drive option -I)
LT26BFME, LT26BFML (LTO-7 FC HH drive option -I)
LT26BSNE, LT26BSNL (LTO-8 SAS HH drive option -I)
LT26BFNE, LT26BFNL (LTO-8 FC HH drive option -I)
Step 3 are checked in the Device Manager, the connection test is complete.
Copyright 2019 FUJITSU LIMITED
34
End of procedure
P3AM-8812-07ENZ0