Siemens SINAMICS S120 Device Manual page 125

Cabinet modules nema

Hide thumbs Also See for SINAMICS S120:

Table of Contents

Cable routing of signal cables to the customer terminal block –X55

1. Feed the cable for the customer terminal block into the cabinet from the bottom left.

2. Use cable ties to secure the cable at suitable points.

3. Feed the cable toward the top of the cabinet and, when it reaches the level of the

customer terminal block -X55, guide it to the left or right to -X55. When doing so, route

the cable in a similar manner to the standard cables that have already been installed in

the cabinet.

4. Use cable ties to secure the cable at suitable points.

5. Connect the cables to the customer terminal block -X55.

Cabinet Modules NEMA

Manual, 04/2014, A5E03586450A

Electrical installation

4.5 Connections