Item
Action
32
K82,
Terminal Module for
activating safety functions
"Safe Torque Off" and
"Safe Stop 1"
33
K87,
Terminal Module TM54F
34
L25,
circuit breaker in with-
drawable unit design
35
L34,
output-side circuit break-
er
36
L41,
current transformer up-
stream of main switch
37
L45,
EMERGENCY OFF
pushbutton in the cabinet
door
38
L50,
cabinet lighting with ser-
vice socket
39
L55,
cabinet anti-condensation
heating
40
L87,
insulation monitoring
Cabinet Modules NEMA
Manual, 04/2014, A5E03586450A
Connect according to "Cable routing for the "Safe Torque
Off" and "Safe STOP 1" functions".
(→ See Chapter "Electrical installation", Section "Cable
routing for the "Safe Torque Off" and "Safe STOP 1" func-
tions")
(→ See Chapter "Options", Section "K82, Terminal Module
for activating safety functions "Safe Torque Off" and "Safe
STOP 1"")
Establish the connection according to "Cable routing for
the functions TM54F".
(→ See Chapter "Electrical installation", Section "Cable
routing for the Terminal Module TM 54F")
(→ See Chapter "Options", Section "K87, Terminal Module
TM54F")
Wire up the checkback contact.
(→ See Chapter "Options", Section "L25, circuit breaker in
withdrawable unit design")
Assign the control parameters.
(→ See Chapter "Options", Section "L34, output-side circuit
breaker")
Wire the measuring connections of the current transform-
er.
(→ See Chapter "Options", Section "L41, current trans-
former upstream of main switch")
Include the option in the EMERGENCY OFF chain.
(→ See Chapter "Options", Section "L45, EMERGENCY
OFF pushbutton in the cabinet door")
Connect the power supply.
(→ See Chapter "Options", Section "L50, cabinet lighting
with service socket")
Connect the power supply.
(→ See Chapter "Options", Section "L55, cabinet anti-
condensation heating")
Integrate the option into the plant-side fault and alarm
circuit.
(→ See Chapter "Options", Section "L87, insulation moni-
toring")
Electrical installation
4.2 Checklist for electrical installation
included/completed?
69