Lithium-Ion Battery Controller (Bms) - Toro Greensmaster eFlex 1021 Service Manual

Lithium-Ion Battery Controller (BMS)

Removing and Installing Lithium-Ion Battery Controller (BMS)
Greensmaster ® eFlex 1021
20248SL Rev A
g349591
1. Bolt (4 each)
2. Washer (4 each)
3. Lithium-ion battery controller
To prevent accidentally shorting disconnected battery cables across
other components or tools, insulate the battery cable terminals with
76 mm (3 inch) lengths of 1/2 inch internal diameter rubber hose
immediately after disconnecting the cables.
g349592
1. Nut
2. Washer
Figure 70
4. Positive (+) battery cables
5. Negative (-) battery cables
6. Nut (4 each)
CAUTION
Figure 71
3. Battery cable terminal (typical)
4. 1/2 inch ID rubber hose
Page 5–47 Electrical System: Service and Repairs