Toro Greensmaster eFlex 1021 Service Manual page 163

Disassembly of the Flex Frame Assembly
g337282
1. Pivot pin latch (2 each)
2. E-ring (2 each)
3. Lever (2 each)
4. Pivot pin (2 each)
5. Spring (2 each)
6. Flex frame
Assembly of the Flex Frame Assembly
Installing the Flex Frame Assembly
Greensmaster ® eFlex 1021
20248SL Rev A
7. Carriage bolt (3 each)
8. LH hub end
9. Roll frame assembly
10. Flange nut (8 each)
11. Flex link (4 each)
12. Flange bushing (8 each)
Disassemble the flex frame assembly using the
Assemble the flex frame assembly using the
1. Position the flex frame assembly onto the machine assembly.
2. Secure the flex frame assembly to the machine assembly with the four
socket head screws.
3. Install the cutting unit onto the machine; refer to Operator's Manual.
4. Connect the battery pack; refer to
(page 5–3).
Figure 95
13.
14.
15.
16.
Figure 95
Connecting the Lithium Battery Pack
Page 6–27 Controls, Wheels and Accessories : Service and Repairs
Carriage bolt (4 each)
RH hub end
Frame link
Flange nut (3 each)
Figure 95 as a guide.
as a guide.