Toro Greensmaster eFlex 1021 Service Manual page 70

Disassembling the Transmission Gear Box Assembly (continued)
g339790
1. External retaining ring
2. Pipe plug
3. Wave washer
4. Ball bearing (2 each)
5. Neutral spur gear
6. Neutral slider shaft
7. Square key (2 each)
8. Bolt (2 each)
9. Differential shaft (2 each)
Traction and Reel Drive Systems: Service and Repairs
3. Remove the oil seal (6), retaining ring (5) from the transmission cover (23).
Use a press to remove the ball bearing (25) from the transmission cover (23).
Discard the oil seals and ball bearing.
10. O-ring (2 each)
11. Retaining ring (2 each)
12. Flange bearing (2 each)
13. Ball bearing (2 each)
14. Differential assembly
15. Retainer plate pin
16. Brake plate retainer
17. Retaining ring
18. Brake band
4. Remove the neutral spur gear assembly (item 5 in
washer (3) from the transmission housing assembly (23).
5. Use a press to remove the ball bearings (4) from the neutral slider shaft
(6). Remove the square keys (7) from the neutral slider shaft (6). Discard
the ball bearings.
6. Remove the differential assembly (14) from the transmission housing
assembly (23).
7. Remove the 2 differential shafts (9) from the differential housing (14).
Remove the retaining rings (11) and O-rings (10) from the differential shafts
(9). Discard the O-rings.
8. Use a press to remove the 2 ball bearings (13) and 2 flange bearings (12)
from the differential assembly (14). Discard the ball bearings (13).
Figure 25
19.
20.
21.
22.
23.
24.
25.
Page 4–24
Brake lever
O-ring
Brake clevis pin
Flat wire spring
Transmission housing assembly
Cable brake lever
Bolt
Figure 25) and wave
Greensmaster ® eFlex 1021
20248SL Rev A