Flex Frame Assembly - Toro Greensmaster eFlex 1021 Service Manual

Flex Frame Assembly

g337283
1. Machine assembly
Removing the Flex Frame Assembly
Controls, Wheels and Accessories : Service and Repairs
2. Socket head screws (4 each)
1. Park the machine on a level surface. Ensure that the key switch is in OFF
position and the traction control is in NEUTRAL.
2. Disconnect the battery pack; refer to
(page 5–3).
3. Remove the cutting unit from the machine; refer to Operator's Manual.
4. Remove the four socket head screws (2) that secures the flex frame
assembly (2) to the machine assembly (1).
5. Slide and remove the flex frame assembly (2) from the machine assembly (1).
Figure 94
Connecting the Lithium Battery Pack
Page 6–26
3. Flex frame assembly
Greensmaster
20248SL Rev A
® eFlex 1021