The Gear Box Assembly - Toro Greensmaster eFlex 1021 Service Manual

The Gear Box Assembly

g285625
1. Gear box assembly
2. Drive shield
Removing the Gear Box Assembly
Universal Groomer (Optional): Service and Repairs
3. Cotter pin
4. Clevis pin
The groomer gear box assembly is located on the opposite side of the cutting
unit from the reel drive.
Refer to Figure 116 for this procedure.
1. Remove the cutting unit from the machine and place it on a level work
surface; refer to Operator's Manual.
2. Remove the groomer reel assembly; refer to
(page 8–15).
3. Remove the drive shield.
Figure 116
Page 8–4
5. Input shaft
Removing the Groomer Reel
Greensmaster
20248SL Rev A
® eFlex 1021