Table of Contents
Advertisement
Installation
6
Connection overview
6.5 Connection overview
32 | 151
The fire control panel is approved with the batteries listed above, use only
Siemens provided batteries.
The picture below shows the overview of the panel connection.
Fig. 7: Connection overview of FC360 fire control panel
Panel type specific. Only FC362-xx supports two loops.
Resistor 2.2 kΩ
EOL
Relay
Output module FCA1209-Z1
1
Connection of sounder lines
2
Aux. power supply DC 24 V/0.2 A
3
Configurable IO, default setting as 'Input'
4
Configurable IO, default setting as 'Unmonitored output'
5
Output relay, default setting as 'RT fire'
6
Output relay, default setting as 'RT fault'
7
Output relay, default setting as 'Fire alarm'
Connection of ↑ detector lines (FC361-xx: 1 loop/2 stubs;
8
FC362-xx: 2 loops/4 stubs)
A6V10421795_en--_k
Advertisement
Table of Contents
