Siemens SIMATIC MV500 Operating Instructions Manual page 277

Country-specific approvals
Table A- 1
Approval
Declaration of Conformity
The EC Declarations of Conformity and corresponding documentation is available to the
responsible authorities according to the above-mentioned EC directive at the following
address:
Siemens Aktiengesellschaft
Division Process Industries and Drives
Process Automation
DE-76181 Karlsruhe
Germany
Your marketing contact can provide these if requested.
Installation guidelines
The installation guidelines and safety notices specified in the documentation must be
adhered to during commissioning and operation.
License agreement for supplied software
The device is supplied with software installed. Please note the corresponding license
agreements.
SIMATIC MV500
Operating Instructions, 03/2021, C79000-G8976-C494-05
Country-specific approvals
Description
Underwriters Laboratories, Inc.: UL 61010-1 (Safety Requirements for Electrical
Equipment for Measurement, Control and Laboratory Use - Part 1: General
Requirements)
IEC/UL 61010-2-201 (Safety requirements for electrical equipment for meas-
urement, control and laboratory use. Particular requirements for control
equipment)
Canadian Standards Association: CSA C22.2 No. 142 (Process Control Equip-
ment)
Certificate number: E85972
This product meets the requirements of the EN61000-6-4 Norm.
EAC (Eurasian Conformity)
Eurasian Economic Union of Russia, Belarus, Armenia, Kazakhstan and Kyrgyz-
stan
Declaration of conformity according to the technical regulations of the customs
union (TR CU)
A.2 Certificates, approvals & guidelines
Appendix
277