System Configuration With Cm And Rfid Reader - Siemens SIMATIC MV500 Operating Instructions Manual

4.6

System configuration with CM and RFID reader

①
②
Figure 4-5
System characteristics
• In mixed operation with an RFID reader, e.g. from the SIMATIC RF300 series, the optical
reader can be connected to a communication module and operated.
• Both the optical reader and the RFID reader are integrated in STEP 7 by the Ident profile
block.
• A PC/programming device is connected via Ethernet to allow adjustment of the device.
SIMATIC MV500
Operating Instructions, 03/2021, C79000-G8976-C494-05
Optical sensor or light barrier (for trigger signal)
Object with code
Example: System configuration of optical reader with RFID reader on a communication
module
Network and system integration
4.6 System configuration with CM and RFID reader
99