Operator Control And Monitoring - Siemens SIMATIC MV500 Operating Instructions Manual

Operator control and monitoring

The MV500 optical readers are equipped with a Web server that provides Web-Based
Management (WBM). You can set up and configure your readers using the WBM. You can
create reader-specific programs and program sequences and perform diagnostics, among
other things.
The connection is via Ethernet. The WBM can be accessed via a Web browser, such as Google
Chrome or Microsoft Edge.
This device version has the following advantages:
• You do not have to install the software on your PC.
• You can start the WBM from any PC.
• The WBM is always designed to fit your optical reader. This means that no version conflicts
occur.
Starting WBM
Start the WBM as described in the section "Connecting and setting up the reader (Page 132)".
SIMATIC MV500
Operating Instructions, 03/2021, C79000-G8976-C494-05
8
143