Toro Reelmaster 5010-H Operator's Manual page 26

Seat-Position Lever
Pull the seat-position lever
seat forward and rearward. Release the lever to lock
the seat position.
Weight-Adjusting Knob
Rotate the weight-adjusting knob until your weight is
displayed in the window of the weight gauge.
Height-Adjusting Knob
Rotate the height-adjusting knob to change the height
of the seat.
Using the InfoCenter LCD Display
The InfoCenter LCD display shows information about
your machine such as the operating status, various
diagnostics and other information about the machine
(Figure 46). There are multiple display screens on the
InfoCenter. You can switch between the screens, at
any time, by pressing any of the InfoCenter buttons
and then selecting the appropriate directional arrow.
1. Indicator light
2. Right button
•
Left Button, Menu Access/Back Button— Press
this button to access the InfoCenter menus.
You can use it to back out of any menu you are
currently using.
•
Middle Button— Press this button to scroll down
menus.
•
Right Button— Press this button to open a menu
where a right arrow indicates additional content.
Note:
The purpose of each button may change
depending on what is required at the time. Each
button is labeled with an icon displaying its current
function.
(Figure 45) to move the
Figure 46
3. Middle button
4. Left button
InfoCenter Icon Description
SERVICE DUE
g020650
26
Indicates when scheduled service
should be performed
Hour meter
Info icon
Fast
Slow
Fuel level
The glow plugs are active.
Raise the cutting units.
Lower the cutting units.
Sit in the seat.
The parking brake is on.
The range is high (transport).
Neutral
The range is low (mow).
Engine-coolant temperature (°C or
°F)
Temperature (hot)
The PTO is engaged.
Not allowed
Start the engine.
Stop the engine.
Engine
Key switch