Replacing The Tec Fuse; Replacing The Telematic Fuse - Toro Reelmaster 5010-H Operator's Manual

Figure 103
1. Cap
2. Fuse
4. Replace the open fuse with a fuse of the same
type and amperage rating.
5. Assemble the cap to the in-line fuse holder.
6. Close and latch the hood; refer to
Hood (page 43).

Replacing the TEC Fuse

1. Prepare the machine for maintenance; refer to
Preparing for Maintenance (page
2. Unlatch and open the hood; refer to
Hood (page 43).
3. At the rear, right side of the engine, remove the
cover of the in-line fuse holder labeled 2A F
TEC P .
WR
g379038
3. Fuse holder (labeled
E F 10 A 125 V)
NABLE USE
Closing the
43).
Opening the
USE
1. Cap
2. Fuse
4. Replace the open fuse with a fuse of the same
type and amperage rating.
5. Assemble the cap to the in-line fuse holder.
6. Close and latch the hood; refer to
Hood (page 43).
Replacing the Telematic
Fuse
1. Prepare the machine for maintenance; refer to
Preparing for Maintenance (page
2. Unlatch and tilt seat; refer to
(page 44).
3. Remove the cap from the in-line fuse holder
labeled 10 A F
60
Figure 104
3. Fuse holder (labeled2A
F TEC P
USE WR
Closing the
43).
Tilting the Seat
T P (Figure
USE ELEMATIC WR
g379039
)
105).