Specifications; Attachments/Accessories - Toro Reelmaster 5010-H Operator's Manual

3. Use the center and right button to select the
appropriate HOC setting. (If the exact setting is
not displayed, select the nearest HOC setting
from the list displayed).
4. Press the left button to exit HOC and save the
setting.
Setting the Front and Rear Reel
Speeds
Although the front and rear reel speeds are calculated
by inputting the number of blades, mow speed and
HOC into the InfoCenter, the setting can be manually
changed to accommodate for different mowing
conditions.
1. To change the Reel Speed Settings, scroll down
to the F Reel RPM, R Reel RPM, or both.
2. Press the right button to change the reel speed
value. As the speed setting is changed, the
display continues to show the calculated reel
speed based on blade count, mow speed and
HOC which was previously entered, but the new
value also is displayed.
Setting the Economy Mode
1. From the Main Menu, use the center button to
scroll down to the Settings Menu.
2. Press the right button to select.
3. In the Settings Menu, use the center button to
scroll down to the Economy Mode.
4. Press the right button to select the O
5. Press the left button to save the setting and exit
the settings.
To Access Protected Display
Screens
From the main screen, press the center button once,
when the arrows appear above the buttons, press
the center button again to scroll through the display
screens.
Press the center button again to access the eReel
information screen displaying the reel current and the
speed for each of the 5 cutting units.
Press the center button again to access the energy
mode screen displaying the components, energy flow
and the direction while in operation.

Specifications

Note:
change without notice.
Transport Width
Width of cut
Length
Height w/ ROPS
Weight
Engine
Fuel tank capacity
Transport speed
Mowing speed

Attachments/Accessories

A selection of Toro approved attachments and
accessories is available for use with the machine
to enhance and expand its capabilities. Contact
your Authorized Service Dealer or authorized Toro
distributor or go to
approved attachments and accessories.
To ensure optimum performance and continued safety
certification of the machine, use only genuine Toro
replacement parts and accessories. Replacement
parts and accessories made by other manufacturers
could be dangerous, and such use could void the
product warranty.
function.
N
30
Specifications and design are subject to
0 to 16 km/h (0 to 10 mph)
0 to 13 km/h (0 to 8 mph)
www.Toro.com
228 cm (90 inches)
254 cm (100 inches)
282 cm (111 inches)
160 cm (63 inches)
1259 kg (2,776 lb)
Kubota 24.8 hp
53 L (14 US gallons)
for a list of all