Huawei USG6000E Series Hardware Manual page 278

HUAWEI USG6000E Series
Hardware Guide
Port
10GE optical ports
(0 to 11)
40GE optical ports
(0 to 1)
USB 2.0 port
Issue 08 (2022-04-20)
Connector Type
SFP+
QSFP+
USB 2.0 Type A
Copyright © Huawei Technologies Co., Ltd.
4 Hardware Overview
Description
12 GE/10GE
autosensing
Ethernet optical
ports, numbered
from
XGigabitEthernet0
/0/0 to
XGigabitEthernet0
/0/11.
When 40GE0/0/1
optical port on
the device is
enabled, the 10GE
optical ports
numbered from
XGigabitEthernet0
/0/8 to
XGigabitEthernet0
/0/11 cannot be
used.
Two 40GE
Ethernet optical
ports, numbered
from 40GE0/0/0
to 40GE0/0/1.
By default, the
40GE0/0/1 optical
port mode is
disabled. To
enable this mode,
run the set device
port-config-mode
40g-port enable
command.
USB ports allow
you to insert USB
devices for system
software
upgrades. For
details on
upgrades through
USB devices, refer
to the Upgrade
Guide delivered
with the device.
Available
Components
● 1Gbps SFP
Copper
Modules
● 1Gbps eSFP
Optical
Modules
● 10Gbps SFP+
Optical
Modules
40Gbps QSFP+
Optical Modules
USB flash drive
that complies
with USB 2.0
271