Table of Contents
Advertisement
HUAWEI USG6000E Series
Hardware Guide
The hard disks, power modules, and fan modules of the USG6000E are
replaceable. You can replace them as instructed.
6.1 Replacing the Hard Disk
This section describes how to replace the hard disk as well as the precautions.
Precautions
Precautions for using the hard disks
●
●
●
●
●
●
Tools
ESD bag
Replacing the Hard Disk (USG6515E, USG6525E, USG6550E, USG6555E,
USG6560E, USG6565E, USG6580E, USG6585E)
If a hard disk is faulty (for example, a hard disk failure log is generated on the
USG), you can replace the hard disk. The hard disk can be replaced no matter
when the USG is powered on or off. If the USG is powered off, skip
Issue 08 (2022-04-20)
6
Maintaining the Hardware
Use hard disks purchased from Huawei. Otherwise, the system may not
identify them.
Powering off the USG interrupts services. Install or replace the hard disks
during off-peak hours.
Wear the ESD wrist strap while working on the USG to avoid possible
damages to the USG and hard disks.
While holding a hard disk, do not touch the PCB board or squeeze the disk.
Carry only one hard disk at a time. Do not vibrate, crash, or pile multiple hard
disks up.
Put the hard disks inside ESD bags when they are not used.
For mapping relationships between the USG and hard disks, see
Overview.
Copyright © Huawei Technologies Co., Ltd.
6 Maintaining the Hardware
Hardware
Step 1
and do
580
Hide quick links:
Advertisement
Table of Contents
