Huawei USG6000E Series Hardware Manual page 340

HUAWEI USG6000E Series
Hardware Guide
1. Product
series ID
6. MAC label
Table 4-140 Component functions
Name
Product series ID
Indicator and button
area
HDD/SSD slot
Fixed interface area
Protective ground
terminal
MAC label
SN label
Fan module
Power module
Issue 08 (2022-04-20)
2. Indicator
and button
area
7. SN label
Description
Indicates the product series of the device. For details
about the product model, see the nameplate in the
lower part of the device.
Provides multiple indicators to display the running
status of the device in real time and provides the RST
button for emergency maintenance.
Houses hard disks for storing log and report data.
Provides service ports, USB ports, console ports, and
out-of-band management ports for device
configuration and maintenance.
Connects the M4 OT terminal of a PGND cable to the
cabinet or the ground bar in the equipment room.
Uniquely identifies the MAC address of the device,
which is required during network forwarding
configuration.
Uniquely identifies the device, which needs to be
provided for the local technical support personnel to
apply for a license.
Dissipates heat for the device and is swappable. The
fan module can be removed for no more than 1
minute.
Provides power input and distribution for the device.
Two power modules are included in the standard
configuration to provide 1+1 power redundancy. When
one power module is running properly, the other one is
hot swappable.
Copyright © Huawei Technologies Co., Ltd.
3. HDD/SSD 4. Fixed
slot interface area
8. Fan module 9. Power
module
4 Hardware Overview
5. Protective
ground
terminal
-
333