Huawei USG6000E Series Hardware Manual page 527

HUAWEI USG6000E Series
Hardware Guide
Figure 5-10 Mounting the USG on a wall
----End
Follow-up Procedure
After wall-mounting is complete, verify that:
●
●
5.3.2 Connecting a PGND Cable
Connecting the PGND cable of a USG6510E, USG6510E-POE, USG6530E correctly
is a key measure of surge protection and resistance to interference. Before using
the USG6510E, USG6510E-POE, USG6530E, correctly connect the PGND cable.
Otherwise, the USG may be damaged.
Precautions
The USG has been installed inside a cabinet.
Issue 08 (2022-04-20)
The USG is securely fixed on the wall.
A clearance of 10 cm is maintained around the USG and the air flow is not
blocked.
Copyright © Huawei Technologies Co., Ltd.
5 Hardware Installation
520