HUAWEI USG6000E Series
Hardware Guide
Figure 5-29 Installing a hard disk (USG6575E-B, USG6605E-B, USG6610E,
USG6615E, USG6620E, USG6625E, USG6630E, USG6635E, USG6650E, USG6655E)
Step 3 After the ejector lever of the hard disk is fastened to the chassis, close the hard
disk ejector lever.
Step 4 After the installation is complete, perform the following operations:
●
●
----End
5.4.4 Connecting a Console Cable
After connecting a PC to the console port of a USG6515E, USG6525E, USG6550E,
USG6555E, USG6560E, USG6565E, USG6575E-B, USG6580E, USG6585E,
USG6605E-B, USG6610E, USG6615E, USG6620E, USG6625E, USG6630E,
USG6635E, USG6650E, USG6655E with a console cable, you can use the terminal
emulation program on the PC to access the command configuration interface of
the USG6515E, USG6525E, USG6550E, USG6555E, USG6560E, USG6565E,
USG6575E-B, USG6580E, USG6585E, USG6605E-B, USG6610E, USG6615E,
USG6620E, USG6625E, USG6630E, USG6635E, USG6650E, USG6655E.
Issue 08 (2022-04-20)
NO TE
Operations after the USG power-on must be performed after all installation tasks are
complete.
Before the USG is powered on, ensure that the hard disk is correctly installed.
After the USG is powered on, run the display disk information command in
the user view to check whether the Filesystem Status value is Mounted.
Copyright © Huawei Technologies Co., Ltd.
5 Hardware Installation
549