Cleaning The Cabinet And The Charging Cable - Siemens SICHARGE UC Operating Instructions Manual

Cleaning the touch screen
Clean the touch screen as follows:
1. Apply the cleaning agent on the cleaning cloth.
2. Start cleaning at the edge of the screen.
3. Wipe with the cleaning cloth from the edge of the screen to the inside.
See also
Chemical resistance of the HMI device
(support.industry.siemens.com/cs/ww/en/view/39718396)

10.5.2 Cleaning the cabinet and the charging cable

WARNING
Electric shock due to water ingress
Water entering the SICHARGE UC dispenser can damage the SICHARGE UC dispenser. If the unit is
damaged, dangerous voltages may be present on the cabinet or exposed components, which can
cause serious injury or death if touched.
• Always keep the cabinet doors closed during cleaning.
• Never use a pressure washer or steam cleaner to clean the SICHARGE UC dispenser.
WARNING
Damage to property due to improper cleaning agents
Improper cleaning agents can damage the exterior surfaces of the SICHARGE UC dispenser.
Therefore, do not use any solvents. Also, never use aggressive or abrasive cleaning agents.
Permitted cleaning agents
• Use a mild, non-corrosive cleaning agent, even in the case of heavy soiling. An example of mild detergent
would be dish washing liquid.
• Deionized water is particularly suitable for cleaning the unit.
Operating Instructions | SICHARGE UC Dispenser UL
101