Plugging In The Charging Cable - Siemens SICHARGE UC Operating Instructions Manual

SICHARGE UC Dispenser UL | Operating Instructions
NOTICE
Damage due to unsuitable objects
If you touch the touch screen with unsuitable objects, you are significantly reducing the service life
of the display. If there is severe damage, the touch screen can also fail.
To avoid damaging the touch screen, follow the instructions below:
• Do not touch the touch screen with sharp or pointed objects.
• Avoid shock or impact with hard objects.
• Touch the touch screen only with your fingers or a touch pen.

8.2 Plugging in the charging cable

To start charging, simply plug the charging cable into the charging socket of the electric
vehicle. The SICHARGE UC dispenser automatically assumes control of the charging process.
Immediate locking of the charging plug in the vehicle's charging socket ensures a secure
connection to the vehicle during the charging process. In addition, the SICHARGE UC dispenser
sets the charging parameters for an optimal charging process, depending on the specific vehicle.
DANGER
Explosion or electric shock
If you use a damaged charging cable or charging socket, you may cause explosions, electric shock,
or short circuits.
• Before each use, check the vehicle's charging cable, charging plug, and charging socket for
damage.
• Never use a damaged charging cable.
• Never plug the charging plug into a damaged charging socket.
• If the charging cable or the plug-in connection is damaged during charging, immediately
press the EMERGENCY OFF button of the SICHARGE UC charging station.
Requirements
• You have positioned the vehicle with the charging socket within reach of the charging plug.
• You have engaged the parking brake of the vehicle.
• You have switched off the motor.
64