Unpackaging The Charging Station - Siemens SICHARGE UC Operating Instructions Manual

SICHARGE UC Dispenser UL | Operating Instructions

4.1.3 Unpackaging the charging station

Depending on the transport route, the carrier supplies the charging station in different transport packaging.
Therefore, the packaging does not look the same. Specifications for the disposal of the packaging material
can be found in the section Disposal (Page 104).
Removing the packaging for road transport
To remove the packaging, proceed as follows:
1. Remove transport film
2. Remove the edge protection strips
3. Remove the spacers
Removing the packaging for air transport
To remove the packaging, proceed as follows:
1. Remove the side walls of the packaging one-by-one as follows:
– Unscrew the screws in the side panel
– Remove the side panel
2. Remove the cover of the transport packaging
Removing the packaging for sea transport
To remove the packaging, proceed as follows:
1. Remove the aluminum compound foil
2. Remove the side walls of the packaging one-by-one as follows:
– Unscrew the screws in the side panel
– Remove the side panel
3. Remove the cover of the transport packaging
32