The Five Safety Rules For Electrical Work; Safety Sign - Siemens SICHARGE UC Operating Instructions Manual

Hide thumbs Also See for SICHARGE UC:

Table of Contents

SICHARGE UC Dispenser UL | Operating Instructions

2.2

The five safety rules for electrical work

NFPA 70E "Standard for Electrical Safety in the Workplace" prescribes safety rules for working in and on electrical

systems. To ensure the safety of persons and property in accordance with the standards, always comply with the

following safety rules:

Securing an electrical system before starting work

Before starting work on and in electrical installations, apply the following five safety rules:

1. Disconnect the charging station from the voltage source

2. Secure against reclosing

3. Ensure there is no voltage present

4. Install temporary grounding means

5. Install temporary shields over any adjacent live parts

Prepare to switch on again after work is finished

After finishing and checking the work, prepare the restart as follows:

• Inform persons no longer required that the work is completed and no further work is permitted.

• Withdraw all persons no longer required.

• Remove all tools, equipment, and aids used.

Switch on the electrical system again

After finishing the work, remove the protective measures and switch the system on again:

1. Remove temporary shields over live parts

2. Remove temporary grounding means

3. Reinstate any reclosing

4. Close and latch all doors

5. Switch the system back on

2.3

Safety signs are attached to the SICHARGE UC dispenser and on the packaging for safe handling of the

SICHARGE UC dispenser.

Table of Contents