Unpackaging The Sicharge Uc Dispenser - Siemens SICHARGE UC 150 UL Installation And Operation Manual

SICHARGE UC 150 UL Plug-in Dispenser | Installation and Operations Manual

4.1.3 Unpackaging the SICHARGE UC dispenser

Depending on the transport route, the carrier supplies the SICHARGE UC dispenser in different transport packaging.
Therefore, the packaging does not look the same. Specifications for the disposal of the packaging material
can be found in the section Disposal
Removing the packaging for road transport
To remove the packaging, proceed as follows:
1. Remove transport film
2. Remove the edge protection strips
3. Remove the spacers
Removing the packaging for air transport
To remove the packaging, proceed as follows:
1. Remove the side walls of the packaging one-by-one as follows:
– Unscrew the screws in the side panel
– Remove the side panel
2. Remove the cover of the transport packaging
Removing the packaging for sea transport
To remove the packaging, proceed as follows:
1. Remove the aluminum compound foil
2. Remove the side walls of the packaging one-by-one as follows:
– Unscrew the screws in the side panel
– Remove the side panel
3. Remove the cover of the transport packaging
32
(Page 112).