Table of Contents
Advertisement
Note
Access to the EMERGENCY OFF button
Ensure that only trained personnel operate the SICHARGE UC dispenser.
To operate the EMERGENCY OFF button immediately in case of an emergency, these
persons must be guaranteed access to the SICHARGE UC charging station.
NOTICE
Displays
Use the SICHARGE UC dispenser only with working displays. Notify the electrician in charge when the
HMI display or the LED display fails.
Use the charging cable safely
To use the charging cable safely, it is essential that the following safety instructions are observed:
• Never use force to remove the charging plug from the charging socket of the vehicle or
the holder of the SICHARGE UC dispenser.
• Check the vehicle's charging cable and charging socket for damage or dirt before charging.
• Only start charging with an undamaged and clean charging cable and charging socket of the vehicle.
• Do not change the vehicle position during charging.
• Always use the charging cable without an adapter or extension cable.
• Do not bend or twist the charging cable.
• Do not drop the charging cable.
• After removing the charging plug, place it immediately into the plug holder of the SICHARGE UC dispenser.
• Always place the charging cable back on the cable holder of the SICHARGE UC dispenser.
• Protect the charging plug from rain (plug holder or plugged into the vehicle).
Safe operation of the HMI screen
The HMI screen is the central display and operator control element of the SICHARGE UC dispenser.
• Only operate the HMI screen with your fingers or a touch pen.
• Observe the information regarding cleaning and care in the section Cleaning the HMI screen
Installation and Operations Manual | SICHARGE UC 150 UL Plug-in Dispenser
(Page
108).
63
Advertisement
Table of Contents
