Receive Settings; Output Settings - Epson ET-16500 User Manual

User's Guide
Auto Rotation
An A4 size original placed in the ADF or on the scanner glass with its long edge facing to the left is sent
as an A3 size fax. Enable this to rotate the scanned image to send it at A4 size.
Batch Send
When there are multiple faxes waiting to be sent to the same recipient, this groups them together to
send them at once. Up to five documents (up to 100 pages in total) can be sent at one time. This helps
you save on connection fees by reducing the number of transmission times.
Save Failure Data
Saves documents that failed to be sent in the printer's memory. You can resend the documents from the
Status Menu.

Receive Settings

Select the menus on the control panel as described below.
Setup > System Administration > Fax Settings > Receive Settings
Receive Mode
Select the receive mode.
DRD
If you have subscribed to a distinctive ring service from your telephone company, select the ring
pattern to be used for incoming faxes. The distinctive ring service, offered by many telephone
companies (the service name differs by company), allows you to have several phone numbers on one
phone line. Each number is assigned different ring pattern. You can use one number for voice calls and
another for fax calls. Depending on the region, this option may be On or Off.
Rings to Answer
Select the number of rings that must occur before the printer automatically receives a fax.
Remote Receive
When you answer an incoming fax call on a phone connected to the printer, you can start receiving the
fax by entering the code using the phone.

Output Settings

Select the menus on the control panel as described below.
Setup > System Administration > Fax Settings > Output Settings
Fax Output
You can set to save received documents in the inbox, on a memory device, or on a computer, or forward
the documents.
Faxing
130