Printing A Network Status Sheet; Replacing Or Adding New Access Points; Changing The Connection Method To A Computer - Epson ET-16500 User Manual

User's Guide

Printing a Network Status Sheet

You can check the detailed network information by printing it.
1. Load A4-size plain paper in the printer.
2. Enter Setup from the home screen.
3. Select Network Status > Wi-Fi/Network Status.
4. Press Print.
5. Press the button.

Replacing or Adding New Access Points

If the SSID changes due to the replacement of an access point, or an access point is added and a new network
environment is established, re-set the Wi-Fi settings.
Related Information
"Changing the Connection Method to a Computer" on page 39
&

Changing the Connection Method to a Computer

Using the installer and re-set up in a different connection method.
❏ Setting up from the website
Access the following website, and then enter the product name.
http://epson.sn
Go to Setup, and then click Download in the download and connect part. Click or double-click the
downloaded file to run the installer. Follow the on-screen instructions.
❏ Setting up using the software disc (only for the models that come with a software disc and users with computers
with disc drives.)
Insert the software disc into the computer, and then follow the on-screen instructions.
Selecting Change the Connection Methods
Follow the on-screen instructions until the following screen is displayed.
Network Settings
39