Basic Settings - Epson ET-16500 User Manual

User's Guide
Auto Reduction
Reduces large received documents to fit on the paper in the paper source. Reducing may not always be
possible depending on the received data. If this is turned off, large documents are printed at their
original size on multiple sheets, or a blank second page may be ejected.
Auto Rotation
Rotates a landscape-oriented A5, B5, A4, or Letter size received document so that it is printed on the
correct paper size. This setting is applied when two or more paper sources are set for fax printing in
Paper Source Settings > Auto Select Settings, and the paper size settings of the paper sources are A3
and A4, B4 and B5, or A4 and A5.
Collation Stack
Prints received documents from the last page (print in descending order) so that the printed
documents are stacked in the correct page order. When the printer is running low on memory, this
feature may not be available.
Print Suspend Time
Saves documents received during the specified time period in the printer's memory without printing
them. At the time specified to restart printing, the documents are automatically printed. This feature
can be used for noise prevention at night or to prevent confidential documents from being disclosed
while you are away. Before using this feature, make sure there is enough free memory. Even before the
restarting time, you can check and print the received documents individually from Status Menu.
Forwarding Report
Prints a report after forwarding a received document.
Attach Image to Report
Prints a Transmission Report with an image of the first page of the sent document. Select On(Large
Image) to print the upper part of the page without reducing. Select On(Small Image) to print the
entire page reducing it to fit onto the report.
Fax Log Auto Print
Prints the fax log automatically. Select On(Every 30) to print a log every time 30 fax jobs are
completed. Select On(Time) to print the log at a specified time. However, if the number of fax jobs
exceeds 30, the log is printed before the specified time.
Report Format
Select a format for fax reports other than Protocol Trace. Select Detail to print with error codes.

Basic Settings

Select the menus on the control panel as described below.
Setup > System Administration > Fax Settings > Basic Settings
Fax Speed
Select the fax transmission speed. We recommend selecting Slow(9,600bps) when a communication
error occurs frequently, when sending/receiving a fax to/from abroad, or when you are using an IP
(VoIP) phone service.
Faxing
131