Eco Mode; Restore Default Settings - Epson ET-16500 User Manual

User's Guide
These print settings are applied when you print using an external device without using the printer driver.
Top Offset
Adjust the top margin of the paper.
Left Offset
Adjust the left margin of the paper.
Top Offset in Back
Adjust the top margin for the back of the page when performing 2-sided printing.
Left Offset in Back
Adjust the left margin for the back of the page when performing 2-sided printing.
Check Paper Width
Checks the paper width before the printer starts printing. This prevents printing beyond the edges of
the paper when the paper size setting is not correct. However, the printing time may be little longer.
Dry Time
Select the drying time when performing 2-sided printing.
Skip Blank Page
Skips blank pages in the print data automatically.

Eco Mode

Select the menus on the control panel as described below.
Setup > System Administration > Eco Mode
Applies the settings for energy and resource saving. Enabling this feature allows you to make the following settings.
When Eco Mode is disabled, the settings made in Common Settings are applied.
Configure
❏ Sleep Timer
Select the time period before the printer enters sleep mode (energy saving mode) when no
operations are performed. The LCD screen turns black when the set time passes.
❏ LCD Brightness
Adjust the brightness of the LCD screen.
❏ 2-Sided (Copy)
Sets 2-sided copying as the default setting.

Restore Default Settings

Select the menus on the control panel as described below.
Setup > System Administration > Restore Default Settings
Menu Options for Setup Mode
158