Disabling Wi-Fi From The Control Panel; Disconnecting Wi-Fi Direct From The Control; Panel; Restoring The Network Settings From The Control Panel - Epson ET-16500 User Manual

User's Guide

Disabling Wi-Fi from the Control Panel

When Wi-Fi is disabled, the Wi-Fi connection is disconnected.
1. Press on the home screen.
2. Select Wi-Fi Setup.
3. Select Disable Wi-Fi.
4. Check the message, and then select Yes.
5. Press Done.
Disconnecting Wi-Fi Direct from the Control Panel
Note:
❏ When Simple AP mode is disabled, all devices connected to the printer in Simple AP mode are disconnected. If you want
to disconnect a specific device, disconnect from the device instead of the printer.
❏ If you disconnect Wi-Fi Direct mode from the printer or from a device, the network is returned to its original setup.
1. Press on the home screen.
2. Select Wi-Fi Setup.
3. Select Wi-Fi Direct Setup.
4. Select Disconnect.
5. Check the message, and then select Yes.
6. Press Done.
Restoring the Network Settings from the Control

Panel

You can restore all network settings to their defaults.
1. Enter Setup from the home screen.
2. Select System Administration.
3. Select Restore Default Settings.
4. Select Wi-Fi/Network Settings.
5. Check the message, and then select Yes.
Network Settings
41