Advertisement
Fault code number
181
182
183
184
185
301
302
304
305
306
307
1101
1102
1103
1104
100
Message in the dis-
play
"System pressure
Safety Stop"
"System pressure
Safety Stop"
"System pressure
Safety Stop"
"System pressure
Safety Stop"
"System pressure
Safety Stop"
"Oil Temperature
Normal"
"Motor Temperature
Normal"
"Auto Calibrate
Failed"
"Track Tension
Failed"
"Oil refill failed"
"Remote control Free
fall detected"
"Left joystick X-axis
disabled"
"Left joystick Y-axis
disabled"
"Left joystick side
rocker disabled"
"Right joystick X-axis
disabled"
Cause
-
-
-
-
-
-
-
-
The track tension can only be
started when the electric motor is
on.
Oil refill is not possible when the
electric motor is on.
The remote control has fallen on
the ground. The product will ig-
nore the signals from the joy-
sticks.
The left joystick is not in neutral
position when you start the re-
mote control.
The left joystick is not in neutral
position when you start the re-
mote control.
The side switch on the left joy-
stick is not in neutral position
when you start the remote con-
trol.
The right joystick is not in neutral
position when you start the re-
mote control.
Solution
Turn the main switch to ON and
then to OFF. If the problem
stays, speak to Husqvarna serv-
ice.
Turn the main switch to ON and
then to OFF. If the problem
stays, speak to Husqvarna serv-
ice.
Turn the main switch to ON and
then to OFF. If the problem
stays, speak to Husqvarna serv-
ice.
Speak to Husqvarna service.
Turn the main switch to ON and
then to OFF. If the problem
stays, speak to Husqvarna serv-
ice.
Accept the warning message on
the display.
Accept the warning message on
the display.
Auto Calibrate again.
Start the motor and start track
tension again.
Stop the electric motor and start
oil refill again.
Accept the warning message on
the display. Make sure that the
remote control is not damaged
before you operate.
Set the left joystick in neutral po-
sition and restart the remote con-
trol.
Set the left joystick in neutral po-
sition and restart the remote con-
trol.
Set the side switch on the left
joystick in neutral position and re-
start the remote control.
Set the right joystick in neutral
position and restart the remote
control.
1401 - 002 - 15.10.2021
Advertisement
