Advertisement
To clean the hydraulic oil cooler (DXR 145)
WARNING:
hydraulic oil cooler become cool before you
clean it.
•
Clean the area around the hydraulic oil cooler with
water and weak cleaning agent.
•
Clean the cooling fins on the hydraulic oil cooler with
compressed air.
•
If the cooling fins do not become clean with
compressed air, use a high pressure washer and a
cleaning agent.
•
To prevent damage to the cooling fins, obey these
instructions:
a) Only use maximum pressure of 100 bar/1450 psi.
b) Make sure that there is a minimum of 40 cm/15.7
in. between the hydraulic oil cooler and the
nozzle.
c) Point the water or the air straight at the hydraulic
oil cooler, parallel with the cooling fins.
To clean the hydraulic oil cooler (DXR 275,
DXR 305, DXR 315)
WARNING:
hydraulic oil cooler become cool before you
clean it.
66
Risk of burn injury. Let the
Risk of burn injury. Let the
•
Clean the area around the hydraulic oil cooler with
water and weak cleaning agent.
•
Clean the cooling fins on the hydraulic oil cooler with
compressed air.
•
If the cooling fins do not become clean with
compressed air, use a high pressure washer and a
cleaning agent.
•
To prevent damage to the cooling fins, obey these
instructions:
a) Only use maximum pressure of 100 bar/1450 psi.
b) Make sure that there is a minimum of 40 cm/15.7
in. between the hydraulic oil cooler and the
nozzle.
c) Point the water or the air straight at the hydraulic
oil cooler, parallel with the cooling fins.
To clean the electrical components
•
Clean the electric motor, the electrical enclosure, the
electrical terminals and the other electrical
components. Use a cloth or compressed air.
CAUTION:
directly on the electrical components.
•
Clean the outer parts of the remote control with a
moist cloth. Clean the inner parts of the remote
control with compressed air.
Do not use water
1401 - 002 - 15.10.2021
Advertisement
