Husqvarna DXR 145 Operator's Manual page 59

To connect the remote control to the product
with a CAN bus cable (DXR 145)
1. Put one end of the CAN bus cable in the connector
on the remote control.
2. Put the other end of the CAN bus cable in the
connector on the product.
3. Tighten the connector screws for the CAN bus cable
by hand.
1401 - 002 - 15.10.2021
To connect the remote control to the product
with a CAN bus cable (DXR 275, DXR 305,
DXR 315)
1. Put one end of the CAN bus cable in the connector
on the remote control.
2. Put the other end of the CAN bus cable in the
connector on the product.
3. Tighten the connector screws for the CAN bus cable
by hand.
59