Advertisement
•
Use the joysticks (A) to move the product. Small
movements of the joystick moves the product slowly.
Large movements of the joystick moves the product
faster. The remote control has 4 joystick patterns,
Joystick pattern on page 60 .
refer to
B
A
CAUTION:
carefully. To move the joysticks with
force does not make the performance of
the product better. The joysticks can
become damaged if you operate them
with too much force.
CAUTION:
control by the joysticks.
•
Turn the knob for adjustment of the tool speed (B) to
adjust the speed of the tool.
•
Turn the knob for adjustment of the product speed
(C) to adjust the speed of the product.
•
To turn the product, operate the caterpillar tracks at
different speeds.
•
To turn the product in small spaces, operate the
caterpillar tracks in different directions.
1401 - 002 - 15.10.2021
C
A
Move the joysticks
Do not lift the remote
•
To move the product around corners in small
spaces, move the caterpillar tracks and the tower at
the same time.
To unlock the joysticks on the remote
control
If the joysticks on the remote control are not used for 3
seconds, they are locked. The symbol (A) shows on the
display.
12345 H
When the joysticks are locked, the product goes into idle
mode. The hydraulic oil goes into the hydraulic oil tank
and there is no pressure in the cylinders.
1. Make sure that the joysticks are in the neutral
position.
A
XX BAR
55
Advertisement
